Saturday, October 30, 2010

Device ‘Hard disk 1′ which is not in persistent mode

"Virtual Machine is configured to use a device that prevents the operation: Device 'Hard disk 1′ is disk which is not in persistent mode. Device 'Hard disk 1′ which is not in persistent mode".

This is a bug in VMWare VSphere 4.0 or 4.0 update 1.

This is because machine went into standby mode because of power settings, and the disk was in independent non-persistent mode, and DRS is enabled in the virtual cluster.

The way I fixed this was to un-register the VM machine.  Create a new machine with same specs, then instead of creating new hard drive, just add the existing hard drives from original machine.

After I did this, I did a storage migrate to put all the files together and have the names of the disks all match the name of the new machine.

Delco

Thursday, October 7, 2010

Wipe Verizon Razr to Factory

This is how to reset Phone to Factory --- Wipes Everything, no going back!

1. Open your phone up and go to "Settings"
2. Next go to the selection for "Initial Setup"
3. Next go to the selection for "Master Clear"
4. Then select to confirm the option.
5. Now enter the security code which should be "000000"
6. Finally press select or ok and the phone will reset itself to the factory condition

Now you can sell it on Craig's list :)

Delco